• brownstoneboys

Finishing and Protecting 130 Year Old Wood


The natural wood before we stain. We're amazed at how beautiful the natural wood is.


A few months ago we wrote a post about the process stripping layers upon layers of paint off of our 130 year old woodwork. The bannister, door & window casings, and shutters are all original and were caked in paint. Poorly painted we might add. Drips and globs everywhere. We had it all stripped hoping we could at least get it to a point that it could be repainted without the many layers, drips, and globs. We thought if we were lucky we could possibly leave some of it natural. Well we were lucky! Or we just had a very good paint stripper. We were shocked when we saw the beautiful wood under all that paint. It hasn’t seen the light of day in decades and now it’s beauty is out in the open for all to see. Now it’s time to continue the restoration process to repair and bring the wood back to life. 


The shutter was tested with tongue oil. It didn't leave any sheen.

After seeing how great the wood looked natural there is no way we are going to repaint it. That left us with a little bit of a problem. There are some places where we needed to repair or replace some part of it. That means we needed to find or make matching pieces and match the wood color the best we could. 


We're carefully sanding and staining the wood ourselves.

Tung Oil has been recommended most for finishing the natural wood.

The first thing we wanted to address was the newel post. It unfortunately had some bad repair jobs over the years. Some pieces of moulding were missing or damaged. The entire thing also had a reddish tint either from a bad paint or stain job over the years, or because it looks to be a different type of wood from the mahogany bannister and someone might have been trying to match it. We had a very diligent and skilled specialist that worked on it methodically for a couple of weeks. He reproduced smaller pieces of moulding, tediously sanded out the red color, and carefully stained the new wood to match the existing. It looks great! We can only imagine how many people this newel post greeted as they came through the front door over the 130 years it was there. It’s amazing to see it shine again. 


Our good friend Maria, the incredible paint stripper.

David has spent countless number of hours restoring our hallway newel post.

About 50% of our place has the original baseboards. They are in two pieces. A lower 8” board with an decorative set of groves running down it, and an upper rail. We were faced with the difficult choice of taking out what was there and replacing it all with something new. We just really didn’t want to do that. Our goal has always been to restore as much as we could. Taking out so much original detail to replace it just wasn’t going to work. So we started looking around to see if we could have the original baseboards reproduced. We went over to Adriatic Wood in East New York, Brooklyn with a couple of samples of our baseboard. We don’t think it’s very unique. It’s probably very similar to many other Brooklyn houses built around the same time. They searched what they had in stock and unfortunately they didn’t have it. We were left with only one option, having them reproduced to match. Adriatic has many “knives” on hand that can cut new pieces. If they didn’t have the knife for our moulding already they would need to make one. For this to be an affordable option we needed them to have it. We left our samples there for them to search for a match. A couple of days later we got a call and they had it! Very affordably we were able to have our original baseboards recreated!


Project stairs will be next! We're finally removing the carpet.

We had a new problem. We now have brand new wood baseboards to install next to 130 year old baseboard. The wood would always be a different color. We are also aware of the amount of natural wood we were now going to have and didn’t want it to over power the

place. We decided that we would paint all of the baseboards white while leaving the banister, original vestibule door, window casings and shutters, and door casings natural. 


We were also missing a few spindles from the bannister. They were hilariously replaced with much smaller and completely different store bought versions. We knew there was a small chance we could find some matching ones that were ripped out of some other poor Brownstone at a salvage store, but Adriatic was able to spin us up some new ones on matching mahogany for a very reasonable price. We’re happy to say our bannister is now complete!


We're leaving notes for ourselves & team all throughout the place so nothing is damaged.

Our next step is to protect the wood that we’re leaving exposed. We don’t want to put something on it that would change the color or make it shiny. Several people recommended Tung oil as the best option. After the paint stripping process it left the wood needing a light sanding. We sanded one of the window casings and tested the tung oil to see how it affected the wood. It came out great! It gave the wood a bit more depth but didn’t change the color (or sheen). 


The next step will be for us to sand the rest of the window casings, door casings, and window shutters. Then oil them all to protect and bring it all back to life. Our work is cut out for us.


We spent the long weekend prepping for the final deck installation.

The entire process took a lot of money, time, and effort but we already see it paying off. The original wood is now one of the best features at our place. We’re so happy to see it out from under all of that paint and we know that it’s going to look beautiful for years to come. The natural way.


Thanks for ready! Subscribe below for updates and follow us on Instagram

  • Instagram Social Icon
  • Pinterest Social Icon
  • Twitter Social Icon

©2020 by Brownstone Boys.